TM 5-2420-231-23-2
0159
REMOVAL CONTINUED
NOTE
Tag and mark wires to aid in installation.
22. Position rubber boot (Figure 12, Item 2) aside.
23. Remove nut (Figure 12, Item 4) and disconnect four 24-V cables (Figure 12, Items 3, 5, 6, and 8) from junction
block (Figure 12, Item 7).
24. With assistance, push cable (Figure 12, Item 6) through grommet hole (Figure 12, Item 1) and remove cable
from machine.
Figure 12. 24-V Junction Cables.
0159
END OF TASK
CLEANING AND INSPECTION
0159
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK