TM 5-2420-231-23-2
0198
REMOVAL CONTINUED
3. Remove two bolts (Figure 2, Item 1) and washers (Figure 2, Item 2) from equalizer cover (Figure 2, Item 3).
4. Remove bolt (Figure 2, Item 5), washer (Figure 2, Item 4), and equalizer cover (Figure 2, Item 3) from machine.
Figure 2. Equalizer Cover.
0198
NOTE
Tag and mark wires to aid in installation.
5. Position rubber boot (Figure 3, Item 5) aside.
6. Remove nut (Figure 3, Item 3) and disconnect four 24-V cables (Figure 3, Items 6, 2, 7, and 1) from junction
block (Figure 3, Item 4).
7. Remove nut (Figure 3, Item 9) and disconnect three ground cables (Figure 3, Items 8, 11, and 12) from stud
(Figure 3, Item 10).
Figure 3. 24-V Cables.
0198