18
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
BRAKE MASTER CYLINDERS AND TUBES MAINTENANCE
0224
Removal, Cleaning and Inspection, Installation, Bleeding, Adjustment
INITIAL SETUP
Tools and Special Tools
References
Tool Kit, General Mechanic's
TM 5-2420-231-10
0
0
(WP 0376, Item 117)
WP 0369
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
WP 0374 (Group Number 0603 and 0604)
0
0
Materials/Parts
Equipment Conditions
Cap Set, Protective, Dust and Moisture
Brake master cylinder reservoir and tubes
0
0
(WP 0375, Item 4)
removed (WP 0225)
Rag, Wiping (WP 0375, Item 25)
Front floor cover plate removed (WP 0306)
0
0
Tag, Marker (WP 0375, Item 33)
Instrument panel front cover removed
0
0
Cotter Pin (2)
0
Lockwasher (6)
Estimated Time to Complete
0
Personnel Required
9.3 hr
0
Two
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
Note routing of brake tubes and lines to aid in installation.
0224-1