12
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
LOADER BUCKET CYLINDER HYDRAULIC TUBES REPLACEMENT
023
5
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Tool Kit, General Mechanic's
O-ring (4)
0
0
(WP 0376, Item 117)
Personnel Required
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
Two
Wrench, Combination, Standard Length, 12 Pt,
0
0
1" (WP 0376, Item 126)
References
Wrench, Combination, Standard Length, 12 Pt,
0
0
1-5/16" (WP 0376, Item 129)
WP 0374 (Group Number 0705)
0
Materials/Parts
Equipment Conditions
Cap Set, Protective, Dust and Moisture
0
Loader bucket cylinder hydraulic hoses
0
(WP 0375, Item 4)
removed (WP 0232)
Rag, Wiping (WP 0375, Item 25)
0
Loader lift cylinder hydraulic tubes removed
0
Tag, Marker (WP 0375, Item 33)
0
Tiedown Strap (WP 0375, Item 35)
0
Estimated Time to Complete
Cotter Pin
0
5.0 hr
Lockwasher (7)
0
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0235-1