TM 5-2420-231-23-3
0241
REMOVAL
0241
1. Remove cap from hydraulic tank (TM 5-2420-231-10).
2. Disconnect two hoses (Figure 1, Item 1) from swing cushion valve (Figure 1, Item 3).
3. Disconnect two tubes (Figure 1, Item 2) from swing cushion valve (Figure 1, Item 3).
4. Remove two bolts (Figure 1, Item 6), four washers (Figure 1, Item 5), two nuts (Figure 1, Item 4), and swing
cushion valve (Figure 1, Item 3) from machine.
Figure 1. Swing Cushion Valve.
0241
NOTE
Note orientation of fittings to aid in assembly.
5. Loosen two nuts (Figure 2, Item 3), remove fittings (Figure 2, Item 2), and O-rings (Figure 2, Item 6) from swing
cushion valve (Figure 2, Item 1). Discard O-rings.
6. Remove two fittings (Figure 2, Item 4) and O-rings (Figure 2, Item 5) from swing cushion valve (Figure 2,
Item 1). Discard O-rings.