TM 5-2420-231-23-3
0248
REMOVAL
0248
1. Remove locknut (Figure 1, Item 7), washer (Figure 1, Item 8), two clamps (Figure 1, Item 6), and bolt (Figure 1,
Item 5) from backhoe bucket hydraulic hoses (Figure 1 Items 1 and 4). Discard locknut.
2. Disconnect backhoe bucket hydraulic hose (Figure 1, Item 1) and remove O-ring (Figure 1, Item 9) from back-
hoe bucket cylinder (Figure 1, Item 2). Discard O-ring.
3. Disconnect backhoe bucket hydraulic hose (Figure 1, Item 4) from backhoe bucket cylinder tube
(Figure 1, Item 3).
Figure 1. Backhoe Bucket Cylinder Hydraulic Hoses.
0248
END OF TASK
CLEANING AND INSPECTION
0248
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
