TM 5-2420-231-23-3
0252
REMOVAL CONTINUED
Figure 2. Auxiliary Hydraulic Tubes.
0252
END OF TASK
CLEANING AND INSPECTION
0252
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0252
NOTE
Remove plugs and caps from hoses and fittings.
Install lines as tagged and marked during removal.
1. Position auxiliary hydraulic tube (Figure 2, Item 4) on machine.
2. Install clamp (Figure 2, Item 5), bolt (Figure 2, Item 7), and new locknut (Figure 2, Item 8) on machine.
3. Install clamp (Figure 2, Item 9), bolt (Figure 2, Item 3), and new locknut (Figure 2, Item 2) on machine.
4. Install clamp (Figure 2, Item 12), bolt (Figure 2, Item 10), and new locknut (Figure 2, Item 11) on machine.
5. Connect auxiliary hydraulic tube (Figure 2, Item 4) to auxiliary hydraulic hose (Figure 2, Item 6).
6. Connect auxiliary hydraulic tube (Figure 2, Item 4) to auxiliary hydraulic hose (Figure 2, Item 1).