8
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
RIDE CONTROL SOLENOID VALVE HYDRAULIC TUBES REPLACEMENT
02
53
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool Kit, General Mechanic's
TM 5-2420-231-10
0
0
(WP 0376, Item 117)
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
WP 0374 (Group Number 0718)
0
0
Materials/Parts
Equipment Conditions
Cap Set, Protective, Dust and Moisture
Front floor cover plate removed (WP 0306)
0
0
(WP 0375, Item 4)
Estimated Time to Complete
Rag, Wiping (WP 0375, Item 25)
0
2.2 hr
Tag, Marker (WP 0375, Item 33)
0
0
Tiedown Strap (WP 0375, Item 35)
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Hydraulic oil pressure can remain in the hydraulic system after the engine has been
stopped. Serious injury can occur if this pressure is not released before any service is
done on the hydraulic system.
Failure to follow this warning may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0253-1