TM 5-2420-231-23-3
0253
REMOVAL CONTINUED
12. Disconnect ride control solenoid valve hydraulic tube (Figure 4, Item 1) from fitting (Figure 4, Item 2).
13. Remove ride control solenoid valve hydraulic tube (Figure 4, Item 1) from machine.
14. Disconnect ride control solenoid valve hydraulic tube (Figure 4, Item 4) from fitting (Figure 4, Item 3).
15. Remove ride control solenoid valve hydraulic tube (Figure 4, Item 4) from machine.
Figure 4. Ride Control Solenoid Valve Hydraulic Tubes.
0253
END OF TASK
CLEANING AND INSPECTION
0253
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0253
NOTE
Install lines as tagged and marked during removal.
Remove plugs and caps from hoses and fittings.
Loosely connect all tubes.
1. Position ride control solenoid valve hydraulic tube (Figure 4, Item 4) on machine.
2. Connect ride control solenoid valve hydraulic tube (Figure 4, Item 4) to fitting (Figure 4, Item 3).
3. Position ride control solenoid valve hydraulic tube (Figure 4, Item 1) on machine.
4. Connect ride control solenoid valve hydraulic tube (Figure 4, Item 1) to fitting (Figure 4, Item 2).
