TM 5-2420-231-23-3
0268
DISASSEMBLY
0268
1. Remove fitting (Figure 3, Item 3) and O-ring (Figure 3, Item 4) from hydraulic oil filter assembly (Figure 3,
Item 14). Discard O-ring.
2. Remove hydraulic oil filter restriction switch (Figure 3, Item 9) and two O-rings (Figure 3, Item 10) from hydrau-
lic oil filter assembly (Figure 3, Item 14). Discard O-rings.
3. Remove fitting (Figure 3, Item 7) from fitting (Figure 3, Item 8).
4. Loosen nut (Figure 3, Item 5) and remove fitting (Figure 3, Item 8) and O-ring (Figure 3, Item 6) from hydraulic
oil filter assembly (Figure 3, Item 14). Discard O-ring.
5. Loosen nut (Figure 3, Item 11) and remove fitting (Figure 3, Item 13) and O-ring (Figure 3, Item 12) from
hydraulic oil filter assembly (Figure 3, Item 14). Discard O-ring.
6. Loosen nut (Figure 3, Item 1) and remove fitting (Figure 3, Item 15) and O-ring (Figure 3, Item 2) from hydraulic
oil filter assembly (Figure 3, Item 14). Discard O-ring.
Figure 3. Hydraulic Oil Filter Fittings.
0268
END OF TASK
CLEANING AND INSPECTION
0268
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
