12
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
LOADER LIFT CYLINDER REPLACEMENT
0
269
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Tool Kit, General Mechanic's
Lockwasher (2)
0
0
(WP 0376, Item 117)
O-ring (4)
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
Personnel Required
Plier, Snap Ring (WP 0376, Item 56)
0
Two
Pliers, Retaining Ring, Fixed Tip, Convertible,
0
0
45/.090" Tips, 8-3/4" (WP 0376, Item 60)
References
Sling, Nylon, 6 ft x 1 in. (WP 0376, Item 81)
0
0
Trestle, 10-Ton (WP 0376, Item 120)
WP 0374 (Group Number 0704, 0736, and
0
0
Lifting Device (500-lb capacity)
0804)
0
Materials/Parts
Equipment Conditions
Cap Set, Protective, Dust and Moisture
Machine parked (TM 5-2420-231-10)
0
0
(WP 0375, Item 4)
Front end loader bucket removed
0
Grease, Automotive and Artillery (GAA)
(TM 5-2420-231-10)
0
(WP 0375, Item 14)
Air cleaner barrier curtain removed (WP 0099)
0
Rag, Wiping (WP 0375, Item 25)
0
Estimated Time to Complete
Tag, Marker (WP 0375, Item 33)
0
4.4 hr
Cribbing
0
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0269-1