TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
LEFT FRONT
Before
Overall
a. Check on ground under loader for Class III oil or coolant leaks
1
evidence of fluid leakage such as oil, are evident. Any fuel leakage
is evident.
coolant, or fuel.
b. Check loader for obvious damage Damage that would impair
operation is evident.
that would impair operation.
Before
Left Front Tire
a. Check tire for correct inflation.
Tire does not hold pressure.
2
Refer to WP 0002 for pressure
specifications.
b. Check for missing bolts.
Two or more bolts missing.
c. Check tread and sidewall for cuts
Damage to tire that would
lead to tire failure is evident.
and foreign material in treads.
d. Check backside of wheel for oil
Class III oil leaks are evident.
leaks from final drive.
Before
Air Tanks
CAUTION
3
Completely lower the bucket to prevent vehicle movement. Be
sure there is an adequate supply of pressure in the air system.
Do not open the drain valves more than two turns.
Failure to comply may cause damage to equipment.
NOTE
It is especially important that the air tanks are thoroughly
drained of water in cold weather.
a. Start engine and build up air
System does not hold air
pressure.
pressure in air system.
b. Shut down engine (WP 0005).
c. Open air tank drain valves.
d. Drain accumulated water from
tanks, then close valves.
0013-2
