TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
Before
Engine Oil Level c. Loosen "T" handle of oil level
5
gauge, remove gauge, and wipe
(Cont.)
clean.
d. Insert gauge completely, but do
not tighten.
e. Remove gauge and check oil level.
If level is at or below "L" (low) mark,
remove filler cap and add oil through
filler pipe to bring level up to "H" (full)
mark on gauge. See Table 2,
Lubricants, in this work package for
grade and quantity of fluid required.
f. Reinstall and secure oil level
gauge and filler cap.
Figure 3. Checking Engine Oil Level.
0013
Before
Left Rear Tire
a. Check tire for correct inflation.
Tire does not hold pressure.
6
Refer to WP 0002 for pressure
specifications.
b. Check for missing bolts.
Two or more bolts missing.
c. Check tread and sidewall for cuts
Damage to tire that would
lead to tire failure is evident.
and foreign material in treads.
d. Check backside of wheel for oil
Class III oil leaks are evident.
leaks from final drive.
0013-5