TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
ARTICULATION
AREA
Before
Articulation Pivot a. Wipe grease fittings clean with a
4
Lubrication
rag.
b. Apply GAA grease to fittings (two
Upper and lower articulation
pin/bearing assemblies are
fittings at each pivot point). Wipe off
cracked, have breaks, loose
excess grease from fittings.
or missing mounting bolts, or
damaged or missing grease
fittings.
Figure 2. Articulation Pivot Lubrication Points.
0013
LEFT SIDE
Before
Engine Oil Level a. Park loader on level ground; apply Class III engine oil leak is
5
evident.
parking brake; completely lower
bucket; and stop engine (WP 0005).
b. Allow 10 to 15 minutes for oil to
drain back into crankcase.
0013-4
