TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
RIGHT REAR
a. Check on ground under loader for Class III oil or coolant leaks
Before
Overall
7
evidence of fluid leakage such as oil, are evident. Any fuel leakage
is evident.
coolant, or fuel.
b. Check loader for obvious damage Damage that would impair
that would impair operation.
operation is evident.
To check stop light switch for proper Stop lights are missing,
Before
Stop Lights
8
operation, air pressure gauge must be damaged, or not functioning.
in RUN area. Station a helper at rear
of loader to observe stop lights.
Depress one brake treadle. Stop lights
should go on.
WARNING
DO NOT smoke or permit any open flame in area of H100C
while you are servicing fuel system. Be sure hose nozzle is
grounded against filler tube during refueling to prevent static
electricity. Failure to follow this warning may result in injury or
death to personnel or damage to equipment.
DO NOT perform fuel system checks, inspections, or mainte-
nance while smoking or near fire, flames, or sparks. Fuel may
ignite, causing damage to equipment and injury or death to
personnel.
Wear fuel-resistant gloves and eye protection when handling
fuels. If exposed to fuel, promptly wash exposed skin and
change fuel-soaked clothing.
ALWAYS shut down engine before refueling.
Class I fuel leak from fuel tank
Before
Fuel Tank
Be sure fuel tank is full. Fill tank at
9
end of each day's operation to reduce evident.
condensation of moisture.
Tire does not hold pressure.
Before
Right Rear Tire
a. Check tire for correct inflation.
10
Refer to WP 0002 for pressure
specifications.
b. Check for missing bolts.
Two or more bolts missing.
c. Check tread and sidewall for cuts
Damage to tire that would
and foreign material in treads.
lead to tire failure is evident.
d. Check back side of wheel for oil
Class III oil leaks are evident.
leaks from final drive.
0013-6
