TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
c. Remove cotter pin and clevis pin
Semiannually Parking Brake
29
Adjustment
securing clevis to brake lever.
(Cont.)
d. Loosen jam nut and back it away
from clevis a few turns.
e. Shorten length of brake cable by
rotating clevis onto cable clockwise.
Cable should be shortened enough to
remove all slack from brake arm
without causing contact between
brake lining and drum.
f. Reinstall clevis pin through clevis
and brake arm. Secure clevis pin with
cotter pin.
g. Tighten nut down against clevis.
h. Remove wheel blockings, start
engine, and apply parking brake
Figure 23. Parking Brake Linkage.
0018
0018-39