TM 5-3805-255-14
0018
LUBRICATION INSTRUCTIONS CONTINUED
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low-toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
an goggles. Use in well ventilated areas. Keep away from open flames and other sources
of ignition. Failure to follow this warning may result in injury or death to personnel.
5. Clean area around lubrication points with solvent cleaning compound (WP 0121, Item 3) or equivalent before
lubricating equipment. Keep all external parts not requiring lubrication free of lubricants. After lubrication, Wipe
excess lubricant to prevent accumulation of foreign matter.
6. Maintain a record of lubrication performed and report any problems noted during lubrication. Refer to DA PAM
750-8 for forms and procedures to record and report any findings.
NOTE
Only lubricants authorized for use by the Field Maintainer are listed in this KEY.
KEY
EXPECTED TEMPERATURES*
-25F to
-4F to +50F
+6F to +122F
+32F
(-20C to
(-14C to
LUBRICANT/
REFILL
(-4C to 0C)
INTERVALS
+10C)
+50C)
COMPONENT
CAPACITY
OE/HDO
D - Daily
Lubricating Oil, ICE,
W - Weekly
Tactical Service
Bim -
(MIL-PRF-2104)
Bimonthly
M - Monthly
32 qt
SA - Semi-
See Table 6.
Engine Crankcase
(30.3 L)
annually
AN -
45 qt
Annually
See Table 6.
Transmission
(42.5 L)
55 qt
See Table 6.
Hydraulic Tank
(208.2 L)
GAA
Grease, Automotive
and Artillery
See Table 6.
As Required
Grease Fittings
ANTIFREEZE
65 qt
See Table 7.
Cooling System
(61.5 L)
* For arctic operation, refer to FM 9-207.
0018-59
