TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
Semiannually Planetary Oil
39
WARNING
Change
When servicing this equipment, performing maintenance, or
disposing of materials such as engine/hydraulic oils, coolant,
and fuel, consult your unit/local hazardous waste disposal cen-
ter or safety office for local regulatory guidance.
Engine/hydraulic oils, coolant, and fuel can be very slippery.
Immediately wipe up any spills.
Planetary oil may be hot. Use gloves.
Failure to follow these warnings may result in injury to
personnel.
NOTE
Move loader only enough to properly locate planetary drain
plug.
a. Operate loader until normal
Class III oil leak is evident.
temperature is reached. Park loader
on level ground, completely lower
bucket, apply parking brake, and shut
down engine (WP 0005).
b. Position planetary drain plug at
6 o'clock (Figure 30).
Figure 30. Planetary Drain Plug at 6 O'Clock Position.
0018
0018-56
