TM 5-3805-255-14
0048
REMOVAL CONTINUED
WARNING
Use extreme caution when lifting heavy parts. Provide adequate support and use
assistance during procedure. Ensure that lifting equipment used is on solid footing, is in
good condition, and is of suitable lift capacity. Keep clear of heavy parts supported only by
lifting equipment. Failure to follow this warning may result in death or injury to personnel or
damage to equipment.
Death or injury could occur if unauthorized personnel are in the hoisting area. Permit only
personnel engaged in hoisting operation to be near H100C and lifting equipment.
When lifting components do not swing load from side to side, as this places extra strain on
lifting components. Watch boom angle and overhead clearance when hoisting. Failure to
follow this warning may result in injury or death to personnel or damage to equipment.
NOTE
Remove bolts from transmission mounts to frame (not mounts to transmission).
7. Remove six bolts (Figure 4, Item 2) and locknuts (Figure 4, Item 3) from transmission mounts (Figure 4, Item 1)
to frame. Discard locknuts.
8. Remove transmission (Figure 4, Item 4) from loader.
INSERT ART H100C-0230
Figure 4. Transmission Mounts.
0048
END OF TASK
0048-5
