TM 5-3805-255-14
0049
NOTE
All propeller shafts on the loader are similar, and are serviced in the same manner. Mark
propeller shaft-to-yoke and spider bearing assembly for ease of installation.
REMOVAL
00049
1. Remove eight capscrews (Figure 1, Item 1) and locknuts (Figure 1, Item 2) from propeller shaft (Figure 1,
Item 4). Discard locknuts (Figure 1, Item 2).
WARNING
Propeller shafts may be heavy. Use suitable supporting device when handling propeller
shafts. Failure to follow this warning may result in injury to personnel and damage to
equipment.
2. Apply leverage to telescope slip yoke (Figure 1, Item 3) inward and remove propeller shaft (Figure 1, Item 4)
from loader.
Figure 1. Propeller Shaft Removal.
0049
END OF TASK
0049-2