TM 5-3805-255-14
0050
ASSEMBLY CONTINUED
4. Install shaft and bearing assembly (Figure 11, Item 2) in drive housing (Figure 11, Item 1).
0050
Figure 11. Shaft and Bearing Installation.
0050
NOTE
Spring-loaded lip of seal must face in toward center of housing. Press until seal is flush
with face of cover.
5. Coat outside diameter of new oil seal (Figure 12, Item 2) with sealant and press seal into outside face of cover
(Figure 12, Item 1).
Figure 12. Oil Seal Installation.
0050
0050-9