TM 5-3805-255-14
0050
ASSEMBLY CONTINUED
14. Dimension A is thickness of required shim pack (Figure 16, Item 2). Add to this pack sufficient shims to pro-
duce recommended shaft end play of 0.002 to 0.004 in. (0.050 to 0.101 mm).
15. Install shim pack (Figure 16, Item 2), yoke retainer (Figure 16, Item 3), and new locknut (Figure 16, Item 4) on
transfer drive shaft (Figure 16, Item 1). Tighten locknut to 200 lb-ft (271 Nm).
Figure 16. Shim Pack and Locknut Installation.
0050
16. Install new gasket (Figure 17, Item 2) on drain plug (Figure 17, Item 3) and install drain plug in housing
(Figure 17, Item 1). Tighten drain plug securely.
Figure 17. Drain Plug Installation.
0050
END OF TASK
0050-13
