TM 5-3805-255-14
0050
ASSEMBLY CONTINUED
7. Install parking brake backing plate, parking brake shoes and springs, and parking brake drum assembly on
transfer drive (WP 0058).
NOTE
Coat new lubricating seal lip and seal contact surface of yoke with clean, new transfer
drive lubricant.
8. Place yoke (Figure 14, Item 5) on shaft (Figure 14, Item 1).
9. Place new seal washer (Figure 14, Item 2) (where used) on shaft (Figure 14, Item 1).
10. Install retainer (Figure 14, Item 3) and new locknut (Figure 14, Item 4). Tighten locknut to 200 lb-ft (271 Nm).
Figure 14. Yoke and Drum Installation.
0050
0050-11
