TM 5-3805-255-14
0055
REMOVAL
00055
1. Position rear axle (Figure 1, Item 1) so that input yoke (Figure 1, Item 4) is facing up.
2. Remove two planetaries (WP 0052) and axle shafts from rear axle (WP 00054).
3. Remove 12 bolts (Figure 1, Item 2) and lockwashers (Figure 1, Item 3) from rear axle (Figure 1, Item 1).
Discard lockwashers.
4. Attach suitable lifting device to differential assembly (Figure 1, Item 5), and remove differential assembly
(Figure 1, Item 5) from axle housing (Figure 1, Item 7). Refer to WP 0104 for rear differential overhaul.
Figure 1. Rear Differential Removal.
0055
END OF TASK
CLEANING AND INSPECTION
00055
1. Clean and inspect rear differential assembly IAW General Maintenance Instructions (WP 0019).
2. Replace any worn, pitted, or damaged parts.
END OF TASK
0055-2