TM 5-3805-255-14
0097
REMOVAL CONTINUED
NOTE
Hydraulic pump idler gear shaft bolt has a left-hand thread.
8. If equipped with hydraulic pump idler gear (Figure 5, Item 1), remove hydraulic pump idler gear shaft bolt
(Figure 510) and bearing retainer (Figure 5, Item 9).
9. Remove gear (Figure 5, Item 1) with bearing outer cone (Figure 5, Item 11) and race (Figure 5, Item 2).
10. Remove bearing spacer (Figure 5, Item 7) and bearing inner cone (Figure 5, Item 3) off shaft (Figure 5, Item 8).
Tag or mark inner and outer bearing cones to retain same wear pattern in cup when reassembled.
11. Remove three bolts (Figure 5, Item 4) and locks (Figure 5, Item 5) from gear shaft (Figure 5, Item 7) and tap
shaft off two dowel pins (Figure 5, Item 6).
Figure 5. Removing Hydraulic Pump Idler Gear.
0097
0097-6
