TM 5-3805-255-14
0102
DISASSEMBLY CONTINUED
21. Invert converter housing (Figure 15, Item 3) with open end up.
22. Use snap ring pliers to remove snap ring (Figure 15, Item 2) from groove in upper end of output shaft (Figure
15, Item 1).
23. Remove output shaft (Figure 15, Item 1) and bearing from housing (Figure 15, Item 3).
Figure 15. Output Shaft and Bearing Removal.
0102
24. Remove seal ring (Figure 16, Item 1) and snap ring (Figure 16, Item 3) from output shaft (Figure 16, Item 2).
Discard seal ring.
Figure 16. Seal and Snap Ring Removal.
0102
0102-10
