TM 5-3805-255-14
0102
DISASSEMBLY CONTINUED
NOTE
Do not remove snap ring.
33. Remove four bearings (Figure 22, Item 1) from converter housing (Figure 22, Item 2).
Figure 22. Bearing Removal.
0102
34. Remove seal ring (Figure 23, Item 4) from hub.
CAUTION
Do not attempt to drive ground sleeve from converter housing as serious damage may
occur to both housing and ground sleeve. Support center of housing. Ensure sleeve does
not contact hub.
35. Remove hub (Figure 23, Item 1) and gasket (Figure 23, Item 2) from housing (Figure 23, Item 3). Discard
gasket.
Figure 23. Ground Sleeve Hub Removal.
0102
END OF TASK
0102-14