TM 5-3805-255-14
0105
DISASSEMBLY
000105
1. Remove plug (Figure 1, Item 2) and O-ring (Figure 1, Item 3) from valve body (Figure 1, Item 1). Discard O-
ring.
2. Remove plug (Figure 1, Item 7), gasket (Figure 1, Item 6), spring (Figure 1, Item 5), and check ball (Figure 1,
Item 4) from valve body (Figure 1, Item 1). Discard gasket.
3. Remove plugs (Figure 1, Items 8 and 9) from valve body (Figure 1, Item 1).
4. Remove valve spool (Figure 1, Item 11) and seal (Figure 1, Item 10) from valve body (Figure 1, Item 1).
Discard seal.
5. Remove pin (Figure 1, Item 12) from bottom of valve body (Figure 1, Item 1).
6. Remove plug (Figure 1, Item 16), plug gasket (Figure 1, Item 15), spring (Figure 1, Item 14), and check ball
(Figure 1, Item 13) from valve body (Figure 1, Item 1). Discard gasket.
Figure 1. Forward and Reverse Valve.
0105
END OF TASK
CLEANING AND INSPECTION
000105
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Replace worn or damaged parts as necessary.
3. Inspect end cap for damage or leaks. Replace if necessary.
END OF TASK
0105-2