TM 5-3805-255-14
0104
ASSEMBLY CONTINUED
Range Clutch
000104
1. Install roller bearing (Figure 37, Item 3), spacer (Figure 37, Item 2), and roller bearing (Figure 37, Item 1) on oil
supply port end of clutch shaft (Figure 37, Item 4). Cover rollers with a coat of grease.
Figure 37. Roller Bearings Installation.
0104
NOTE
Heat bearing inner race to 250F (121C).
2. Install drive gear and cup assembly (Figure 38, Item 7) (small diameter, wide gear), spacer washer
(Figure 38, Item 6), bronze thrust washer (Figure 38, Item 5), spacer washer (Figure 38, Item 4), spacer
(Figure 38, Item 3) with large diameter shoulder toward spacer washer, and heated bearing inner race
(Figure 38, Item 2) on clutch shaft (Figure 38, Item 8).
3. Install new snap ring (Figure 38, Item 1) in groove of clutch shaft (Figure 38, Item 8).
Figure 38. Range Clutch Shaft Assembly.
0104
0104-21