TM 5-3805-255-14
0104
ASSEMBLY CONTINUED
NOTE
Heat bearing inner race to 250F (121C).
6. Install input gear (Figure 41, Item 4), with long boss (Figure 41, Item 3) facing out, and heated bearing inner
race (Figure 41, Item 2) on clutch shaft (Figure 41, Item 5).
7. Install new snap ring (Figure 41, Item 1) on clutch shaft (Figure 41, Item 5).
Figure 41. Snap Ring Installation.
0104
8. Assemble transmission (WP 0103).
9. Install transmission (WP 0048).
END OF TASK
END OF WORK PACKAGE
0104-23/(24 blank)