TM 5-3805-255-14
0109
DISASSEMBLY
000109
1. Remove snap ring (Figure 1, Item 18), woodruff key (Figure 1, Item 19), and snap ring (Figure 1, Item 20) from
range housing (Figure 1, Item 17). Discard two snap rings.
2. Remove eight bolts (Figure 1, Item 1) from range housing (Figure 1, Item 17).
3. Remove seal ring (Figure 1, Item 25) from range housing (Figure 1, Item 17). Discard seal ring.
4. Remove plate (Figure 1, Item 2) and gasket (Figure 1, Item 4) from range housing (Figure 1, Item 17). Discard
gasket.
5. Remove spacer (Figure 1, Item 23) and bearing (Figure 1, Item 24) from range housing (Figure 1, Item 17).
6. Remove two pins (Figure 1, Item 3) from plate (Figure 1, Item 2).
7. Remove shaft (Figure 1, Item 22) from range housing (Figure 1, Item 17).
8. Remove pin (Figure 1, Item 5), oil inlet valve (Figure 1, Item 6), O-ring (Figure 1, Item 7), and spring (Figure 1,
Item 8) from shaft (Figure 1, Item 22). Discard O-ring.
9. Remove check ball (Figure 1, Item 9) and spring (Figure 1, Item 10) from valve (Figure 1, Item 11).
10. Remove valve (Figure 1, Item 11), washer (Figure 1, Item 12), retainer (Figure 1, Item 13), washer (Figure 1,
Item 14), bearing (Figure 1, Item 15), washer (Figure 1, Item 21), and seal (Figure 1, Item 16) from shaft
(Figure 1, Item 22). Discard seal.
Figure 1. Range Control Valve.
0109
END OF TASK
0109-2