TM 5-3805-255-14
0108
CLEANING AND INSPECTION
000108
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Replace any parts that are worn or damaged.
END OF TASK
ASSEMBLY
000108
1. Install spring (Figure 2, Item 6), new O-ring (Figure 2, Item 7), and plug (Figure 2, Item 8) on valve (Figure 2,
Item 5). Tighten plug securely.
2. Install valve spool (Figure 2, Item 4), new seal (Figure 2, Item 3), new O-ring (Figure 2, Item 2) and plug
(Figure 2, Item 1) on valve (Figure 2, Item 5). Tighten plug securely.
3. Install neutral knock down valve (WP 0093).
Figure 2. Transmission Neutral Knockdown Valve Assembly.
0108
END OF TASK
END OF WORK PACKAGE
0108-2