TM 5-3805-255-14
0107
CLEANING AND INSPECTION
000107
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Replace damaged or worn parts as necessary.
END OF TASK
ASSEMBLY
000107
1. Install valve (Figure 1, Item 29), two washers (Figure 1, Items 30 and 31), inner spring (Figure 1, Item 32),
outer spring (Figure 1, Item 33), new gasket (Figure 1, Item 34), plate (Figure 1, Item 35), four washers (Figure
1, Item 36), and screws (Figure 1, Item 37) on main regulator valve body (Figure 1, Item 9).
2. Install check ball (Figure 1, Item 27), spring (Figure 1, Item 26), and new pin (Figure 1, Item 25) on main valve
(Figure 1, Item 28).
3. Install assembled main valve (Figure 1, Item 28), new gasket (Figure 1, Item 24), cover (Figure 1, Item 23),
four washers (Figure 1, Item 22), and screws (Figure 1, Item 21) on main regulator valve body (Figure 1,
Item 9).
4. Install washer (Figure 1, Item 20), spring (Figure 1, Item 19), new gasket (Figure 1, Item 18), cover (Figure 1,
Item 17), four washers (Figure 1, Item 16), and screws (Figure 1, Item 15) on main regulator valve body
(Figure 1, Item 9).
5. Install lube valve (Figure 1, Item 6) and plug (Figure 1, Item 5) on main regulator valve body (Figure 1, Item 9).
6. Install valve (Figure 1, Item 29), new gasket (Figure 1, Item 4), cover (Figure 1, Item 3), four washers (Figure 1,
Item 2), and screws (Figure 1, Item 1) on main regulator valve body (Figure 1, Item 9).
7. Install spring (Figure 1, Item 10), new gasket (Figure 1, Item 11), cover (Figure 1, Item 12), four washers
(Figure 1, Item 13), and screws (Figure 1, Item 14) on main regulator valve body (Figure 1, Item 9).
8. Install plugs (Figure 1, Items 7 and 8) on main regulator valve body (Figure 1, Item 9).
9. Install main regulator valve.
END OF TASK
END OF WORK PACKAGE
0107-3/(4 blank)