TM 5-3805-255-14
0117
CLEANING AND INSPECTION
000117
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Inspect pump assembly for leaks or damage; replace if necessary.
END OF TASK
ASSEMBLY
000117
NOTE
Lubricate seal with technical petrolatum.
1. Install new secondary seal (Figure 1, Item 5) new primary seal (Figure 1, Item 6) and washer (Figure 1, Item 7)
on pump body (Figure 1, Item 4).
2. Install bearing (Figure 1, Item 9) and snap ring (Figure 1, Item 10) on shaft (Figure 1, Item 8).
3. Install shaft (Figure 1, Item 8) in pump body (Figure 1, Item 4).
4. Install new seal ring (Figure 1, Item 3) and pump assembly (Figure 1, Item 2) in pump body (Figure 1, Item 4).
5. Align pump housing (Figure 1, Item 1) marks with pump body (Figure 1, Item 4) and install four bolts (Figure 1,
Item 11) to pump body.
6. Install steering pump (WP 0070).
END OF TASK
END OF WORK PACKAGE
0117-3/(4 blank)