TM 5-3805-255-14
0117
DISASSEMBLY
000117
NOTE
Mark pump housing to pump body to aid in assembly.
1. Remove four bolts (Figure 1, Item 11) from pump housing (Figure 1, Item 1).
2. Remove pump assembly (Figure 1, Item 2) and seal ring (Figure 1, Item 3) from pump body (Figure 1, Item 4).
Discard seal ring.
3. Remove snap ring (Figure 1, Item 10) from shaft (Figure 1, Item 8).
4. Remove shaft (Figure 1, Item 8) and bearing (Figure 1, Item 9) from pump body (Figure 1, Item 4).
5. Remove washer (Figure 1, Item 7), primary seal (Figure 1, Item 6), and secondary seal (Figure 1, Item 5) from
pump body (Figure 1, Item 4). Discard seals.
6. Remove bearing (Figure 1, Item 9) from shaft (Figure 1, Item 8).
Figure 1. Steering Pump Assembly.
0117
END OF TASK
0117-2