ENGINE
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
OIL FILTER BASE
REMOVE OIL FILTER BASE
1306-11
Tools Needed
A
2P8250
Strap Wrench
1
1. Open the rear right side access panel looking
from the operator’s seat.
2. Use tool (A) and remove oil filter (1).
3. Remove the bolts, bracket (4) and tube assem-
blies (2) and (3) from the oil filter base and
engine block.
4. Remove bolts (6) and oil filter base (5) from
the oil cooler.
INSTALL OIL FILTER BASE
1306-12
1. Put clean oil on O-ring seals (1) and install
them on oil filter base as shown.
2. Install oil filter base (2) on the oil cooler.
5-55
