ENGINE OIL COOLER

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
99

TM 5-3805-25S24-2 ENGINE DISASSEMBLY AND ASSEMBLY OIL FILTER BASE 3. Install O-ring seals (3) on tube assemblies (4) and (5) and put clean oil on them. 4. Install tube assemblies (4) and (5) on the oil cooler and engine block. 5. Install bracket (6) on tube assemblies (4) as shown. 6. Put clean oil on the filter seal and install oil filter (7) on the oil filter base. Tighten the oil filter ½ turn after the seal makes contact with the filter base. 7. Close the access panel. DISASSEMBLE OIL FILTER BASE 1306-15 start by: a) remove oil filter base 1. Remove three bolts (1) and covers (2) for the bypass valve. 2. Remove the springs and plungers from the base. ASSEMBLE OIL FILTER BASE 1306-16 1. 2. Install plunger (4), spring (3), cover (2) and bolts (1) for the cooler bypass valve in the oil filter base. Install plunger (7), spring (6), cover (5) and the bolts for the oil filter bypass valve in the oil filter base. end by: a) install oil filter base 5-66

Privacy Statement
Press Release
Contact