TM 5-3805-258-24-2
ENGINE
DISASSEMBLY AND ASSEMBLY
OIL PAN
5. Lift the rear of the machine and remove tool
(A).
6. Remove the guide bolts and install the bolts and
nuts (5) that hold the rear axle and support to
the machine. Tighten the bolts to a torque of
475 ± 50 N·m (350 ± 37 lb. ft.).
7. Install tube assemblies (6) on the engine as
shown.
8. Install breather tube (7) on the breather as
shown.
9. Use tool (B) to install guard (8) as shown.
10. Fill the engine with clean oil to the correct level.
See MAINTENANCE GUIDE.
5-62
