5-83
ENGINE
FUEL RATIO CONTROL
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
9.
l0.
11.
12.
13.
14.
15.
16.
For models 950BNS and 950BS only, put stop
(15) in cover (17). Put nut (16) on stop (15).
Make a replacement of the gasket on cover
(14). Put cover (14) on cover (17) and install
the bolts which hold the covers together.
Put engine oil on the seal on valve assembly (3)
and put valve assembly (3) into housing (22).
Put spring (21) on valve assembly (3).
Engage retainer (20) with spring (21). Put
spring (19) into retainer (20).
Put engine oil on valve (8) and put retainer (13)
into housing (22). Engage internal valve (8)
into valve assembly (3).
Put spring (18) into the open face of the washer
behind the diaphragm.
Put cover (17) against housing (22). Make sure
the ring on the diaphragm is engaged with the
groove in cover (17).
