FUEL RATIO CONTROL

FUEL SHUTOFF SOLENOID AND FUEL RATIO CONTROL

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
124

TM 5-3805-258-24-2 ENGINE DISASSEMBLY AND ASSEMBLY FUEL RATIO CONTROL DISASSEMBLE THE FUEL RATIO CONTROL 1278-15 Tools Needed A 1P1859 Snap Ring Pliers 1 1. 2. 3. 4. 5. start by: a) remove fuel ratio control Remove bolts (2) which hold cover (1) to hous- ing (3). Be careful when bolts (2) are removed because cover (1) is under spring force. Make a separation of the components of the fuel ratio control: cover (1), spring (4), valve (5), spring (6), retainer (7), spring (8), valve assembly (9) and housing (3). Make a separation of the covers (1). Remove nut (11) and stop (10) from the cover for models 950BNS and 950BS only. NOTE: Washer (13) is not used on models 950 BNSCE and 950BSCE. Remove nut (12) and make a separation of nut (12), washer (13), washer (14), diaphragm (15), valve extension (17), spring (16) and valve (18). 5-81

Privacy Statement
Press Release
Contact