ENGINEFUEL INJECTION10.11.Install fuel rack (5) in the fuel injection pumphousing with the groove in the end of fuel rackin alignment with the ear (tab) of the rackbearing at the drive end of the fuel injectionpump housing.Install timing pin from tooling (B). Engage thetiming pin in the center groove of the fuel rack.Move the fuel rack in the direction of the arrowto locate the center groove.12. Install spacer (6).13. Put the (slot) groove (8) in the gear segment180° away from the groove (7) in the barrel.When the fuel injection pump is installed,groove (7) must engage the dowel (9).14. Use tool (E) to install the fuel injection pump.Installation is made easier by rotation of thecam lobe away from the lifter assembly.TM 5-3805-258-24-2DISASSEMBLY AND ASSEMBLYPUMP HOUSING5-103
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business