TM 5-3805-258-24-2
ENGINE
DISASSEMBLY AND ASSEMBLY.
GOVERNOR
5. Remove cover assembly (9).
6. Use tooling (A) to remove seal (10) from cover
(9).
7. Remove low idle adjustment screw (12) and
spring (11) from the housing.
8. Remove shaft assembly (14), lever (13) and
lever (15) from the housing.
9. Remove two snap rings from pins (17) and
remove pins (17). Remove plates (16) and stop
(18) from the shaft assembly.
10. Remove pin (20) , pin (19) and spring (21)
from the shaft assembly.
5-106
