POWER TRAIN
TORQUE CONVERTER
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
21. Install two 3/8- 16 NC forged eyebolts (23)
and a hoist to make a separation of the impeller
and the carrier from the housing.
22. Use tool (C) to remove ring (24) from the
carrier.
23. Use tool (D) to carefully remove stator (25)
from the impeller and the carrier.
24. Remove rings (26) from each side of adapter
(27).
25. Heat stator (25) and adapter (27) at 1210 C
(250° F) and remove adapter (27) from stator
(25).
26. Remove retainer (29), two races (28) and the
bearing from the impeller.
5-241