TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TORQUE CONVERTER
13. Put plate (23) and impeller (22) in position on
gear (21).
14. Put hub (24) in position on the impeller.
15. Install bolts (25) that hold the hub, impeller,
plate and the gear together. Tighten the bolts to
a torque of 50 ± 3 N•m (37 ± 2 lb. ft.).
16. Install impeller (22) on carrier (26).
17. Install race (30), bearing (29), race (28) and
retainer (27) (with the lip up) on the hub.
18. Heat stator (32) to a maximum temperature of
121 °C (250° F) and install it on adapter (31).
Make sure the adapter is in the center of the
stator.
5-246
