TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TORQUE CONVERTER
4. Install sleeve (10) and ring (11) in the carrier as
shown.
NOTE: Some earlier models can have two rings (11).
5. Install O-ring seals (12) on plugs (13).
6. Install plugs (13) in both sides of the carrier.
7. Heat bearing (15) to a maximum temperature
of 135° C (275° F) and install it on the carrier.
8. Heat carrier ( 14) to a maximum temperature
of 135°C (275° F) and install it on the carrier.
9. Install rings (17) and (18) on the carrier.
10. Use tool (A) to install ring ( 16) on the carrier.
11. Lower the temperature of race (20) and install
it in gear (21).
12. Install ring (19) on gear (21).
5-245
