TM 5-3805-256-24-2VEHICLE SYSTEMSDISASSEMBLY AND ASSEMBLYASSEMBLE LIFT CYLINDERSLIFT CYLINDERS5102-16Tools NeededA B C D E F1P510Driver Group16V4947Hydraulic CylinderRepair Stand15P5191Seal Guide14S9181Expander Assembly16V109Torque Multiplier11P850Torque Multiplier15P303Socket16V3175Hydraulic Puller19S5558Stud, 1 ¼ in.14K684Washer17P544Nut15P3100Pump Group (or electric)11P1837Plate11. Install inner seal (4) in head (1). The inner sealdoes not have a lip and can be installed either1A.2.3.4.5.6.7.8.way. Install middle seal (3) with the lip in. Usetooling (A) and install outer seal (2) with thelip out. Put clean oil on the seals.On models 950BNSCE and 950BSCE, installwear ring (19).Install backup ring (6) and O-ring seal (5) onthe head. The backup ring goes on the side ofthe O-ring seal away from the piston.Put the cylinder and the rod in position ontooling (A).Put cylinder head (7) in position on the cylinderand install bolts (9).Put tool (C) in position on cylinder rod (8).Use tooling (B) to install the rod in the head.Remove the bolts and make a separation of thehead and rod from the cylinder.Use tool (D) to make an expansion of seal (10)which is part of the seal assembly.5-370
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business