TM 5-3805-258-24-2VEHICLE SYSTEMSDISASSEMBLY AND ASSEMBLYBUCKET CYLINDERSDISASSEMBLE BUCKET CYLINDERSASSEMBLE BUCKET CYLINDERS1.2.3.4.5.start by1. Install back-up (6), O-ring (5) and bearing (7)a) remove bucket cylinders.on the rod assembly (4).Remove the U-ring (12), retainer (11), plug2. Install the O-ring (13), U-ring (2), and piston(8) and wiper (10) from the end of the tube(1) on the rod assembly (4).assembly (3).Separate the rod assembly (4) fromassembly (3).Unscrew the nut (14) from the rod(4).3. Screw the nut (14) on the end of the rodthe tubeassembly (4).4. Slide the piston (1) and rod assembly (4) ontoassemblythe tube assembly (3).5. Install the retainer (11), U-ring (12), plug (8)Remove the piston (1), U-ring (2) and O-ringand wiper (10) on the end of the tube assembly(13) from therod assembly (4).(3). -Remove the bearing (7), O-ring (5) and back-up(6) from the rod assembly (4).5-372b
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business