VEHICLE SYSTEMS
STEERING
REMOVE STEERING CYLINDERS
4303-11
start by:
a) connection of anti-pivot link
WARNING
To prevent personal injury release the pres-
sure from the hydraulic system before any lines
are removed or disconnected.
1.
2.
4.
5.
6.
Disconnect grease line (2) and oil line (1) from
the rear of the steering cylinder.
Disconnect oil line (3) from the rod end of the
steering cylinder.
Remove bolt (5), the spacer and pin (4) from
the rod end of the steering cylinder.
Remove bolt (6), the spacer and pin (7) from
the rear of the steering cylinder.
Put steering cylinder (8) in position as shown.
Use two persons and remove the cylinder
toward the rear (engine end) of the machine.
The weight of the steering cylinder is 41 kg (90
lb.).
Follow Steps 1 through 5 to
steering cylinder.
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
CYLINDERS
remove the other
5-373
