TM 5-3805-258-24-2VEHICLE SYSTEMSDISASSEMBLY AND ASSEMBLYSTEERING CONTROL VALVEModels 950BNS and 950BSREMOVE STEERING CONTROLVALVE4102-11start by:a) connection of anti-pivot linkWARNINGTo prevent personal injury release the pres-sure from the hydraulic system before any linesare removed or disconnected.1. Drain the oil level in the hydraulic tank halfway down.2. Remove bolt (2) and disconnect clips (3) fromthe steering control valve.3. Disconnect oil lines (1) and (5) from the steer-ing control valve.4. Loosen top two bolts (4) that hold the hoseassembly to the steering manifold and steeringmanifold to the steering control valve.5. Remove bolts (6) that connect the manifold tothe steering control valve.6. Remove bolts (7) that hold the steering controlmanifold to steering control valve.7. Remove three bolts (9) and remove steeringcontrol valve (8) from the hydraulic tank.5-386A
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
