TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
STEERING CONTROL VALVE
ModeIs 950BNS and 950BS
REMOVE STEERING CONTROL
VALVE
4102-11
start by:
a) connection of anti-pivot link
WARNING
To prevent personal injury release the pres-
sure from the hydraulic system before any lines
are removed or disconnected.
1, Drain the oil level in the hydraulic tank half
way down.
2. Remove bolt (2) and disconnect clips (3) from
the steering control valve.
3. Disconnect oil lines (1) and (5) from the steer-
ing control valve.
4. Loosen top two bolts (4) that hold the hose
assembly to the steering manifold and steering
manifold to the steering control valve.
5. Remove bolts (6) that connect the manifold to
the steering control valve.
6. Remove bolts (7) that hold the steering control
manifold to steering control valve.
7. Remove three bolts (9) and remove steering
control valve (8) from the hydraulic tank.
5-386b